Tag Archives: AntMiner

AntRouter R1-LTC ~1.29MH/s ASIC Litecoin Miner with Built-In WiFi Router (AntRouter R1-LTC @ 1.29MH/s)

#Antminer #AntRouter #ASICMiner #LitecoinMiner #WifiRouter #iCryptominer

AntRouter R1-LTC ~1.29MH/s ASIC Litecoin Miner with Built-In WiFi Router (AntRouter R1-LTC @ 1.29MH/s)

Buy Here on Amazon: https://amzn.to/2pHXVvn

  • Litecoin Mining Hashrate: 1.29MH/s ±10% (Faster than $900 AMD 7990 GPU)
  • Built-in Web Management – Separate host computer NOT required for mining
  • Can be used to mine any Scrypt-based coin on any pool
  • Built-in power supply (Plugs directly into a power outlet)
  • Can be configured as a WiFi client on your existing network without Ethernet




Bitmain Antminer S9 Bitcoin Miner, 0.098 J/GH Power Efficiency, 13.5TH/s

#Antminer #AntminerS9 #BitcoinMiner #iCryptoMiner

Bitmain Antminer S9 Bitcoin Miner, 0.098 J/GH Power Efficiency, 13.5TH/s

 

Buy Here on Amazon: https://amzn.to/2DXtxlQ

  • SHA256 Mining Hash Rate: 13.5TH/s ±5% (Mines Bitcoin and Bitcoin Cash or any other SHA256-based Coin)
  • Power Consumption: 1323W ±10% (Power supply not included)
  • Built-in web management portal – No separate host computer or software required
  • Most Power Efficient Bitcoin Miner: 0.098 J/GH ±7%
  • Power supply sold separately. AntMiner APW3++ power supply recommended if you have 220v+. EVGA SuperNova 1600 G2 recommended if you have 110-120v power (standard in the US).




Antminer D3 19.3 GH/s X11 ASIC Dash Miner

#AntMiner #AntMinerD3 #Cryptocurrency #CryptocurrencyMiner #DashCoin #DashMiner #DashCoinMiner #ASICMiners #CryptoMiner #iCryptoMiner #Amazon

Antminer D3 19.3 GH/s X11 ASIC Dash Miner

Buy Here on Amazon: https://amzn.to/2I4A0Ol

  • Hash rate: 19.3 GH/s (Variation of ±5% is expected)
  • Power consumption: 1200W (at the wall, with Bitmain’s APW3 PSU, 93% efficiency, 25°C ambient temp)
  • Hashing algorithm: X11 (Dash and many others)
  • Power consumption figures will vary with your PSU’s efficiency, the ambient operating temperature and the accuracy of the power meter. It recommends use of the APW3++ PSU with the Antminer D3. One APW3++ PSU can not power more than one Antminer D3
  • All PCIe connectors on a hashing board need to be connected to the PSU for the hashboard to operate. Do not connect more than one PSU to the same hashing board! Separate power supply to control board: there is one additional 6pin PCIe connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner only after all the PCIE connectors are connected to power supply




AntMiner L3+ ~504MH/s @ 1.6W/MH ASIC Litecoin Miner

#AntMiner #AntMinerL3 #LitecoinMiner #ASICminer #icryptominer #Amazon #Cryptocurrency

AntMiner L3+ ~504MH/s @ 1.6W/MH ASIC Litecoin Miner

Buy Here on Amazon: https://amzn.to/2GagzDd

  • Fastest Litecoin (or other Scrypt-based coin) ASIC miner commercially available!
  • Hash Rate: 504MH/s ±7%
  • Power Consumption: 800W ±10% (Power supply sold separately)
  • Built-in controller – No separate host computer required for operation.
  • Power supply sold separately. AntMiner APW3++ recommended.